Toshiba e-studio 6560c - Page 1120

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS/HDD
9 - 14
(2) Disconnect 1 USB terminal and 3
connectors.
Fig. 9-39
(3) Release a harness from 1 harness clamp
and 10 harness clamps with a lock.
Fig. 9-40
(4) Lift the SYS board case [1] to remove it.
Fig. 9-41
(5) Disconnect 1 connector.
(6) Remove 5 harness clamps with a lock.
Fig. 9-42
[
1
]