Toshiba e-studio 6560c - Page 1216

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
11 - 18
(9) Press the [ON/OFF] button to shut down the equipment, and then remove the USB device.
(10) Perform the initialization of the updating data.
• Press the [ON/OFF] button while holding down the [0] and [8] buttons simultaneously.
• Key in “9030”, and then press the [START] button.
• Press [INITIALIZE].
Scanner Update Error
Error number Error message Description
S01
Time out
(When the download is requested)
Communication timeout
(When a download is requested)
S02
Time out
(When the download is written)
Communication timeout
(When a download is written)
S03
Time out
(When the download is finished)
Communication timeout
(When a download is finished)
S05
Deletion error
(When the download is written)
Deletion error
(When a download is written)
S06
Writing error
(When the download is written)
Writing error
(When a download is written)
S08
Reception status code abnormality
(When the download is requested)
Reception status code abnormality
(When a download is requested)
S09
Reception status code abnormality
(When the download is written)
Reception status code abnormality
(When a download is written)
S10
Reception status code abnormality
(When the download is finished)
Reception status code abnormality
(When a download is finished)
S00 Other error Other error
RADF firmware update error
Error number Error message Description
R01
Time out
(When the download is
requested)
Communication timeout
(When a download is
requested)
R02
Time out
(When the download is written)
Communication timeout
(When a download is written)
R03
Time out
(When the download is finished)
Communication timeout
(When a download is finished)
R05
Deletion error
(When the download is written)
Deletion error
(When a download is written)
R06
Writing error
(When the download is written)
Writing error
(When a download is written)
R08
Reception status code
abnormality
(When the download is
requested)
Reception status code
abnormality
(When a download is
requested)
R09
Reception status code
abnormality
(When the download is written)
Reception status code
abnormality
(When a download is written)
R10
Reception status code
abnormality
(When the download is finished)
Reception status code
abnormality
(When a download is finished)
R21
RADF Uninstallation RADF not installed
R23
RADF Firmware model
mismatch
RADF ROM for different model
data connected
R00
Other error Other error