Toshiba e-studio 6560c - Page 1287

[FAX] button: OFF/[COPY] button: OFF/[SCAN] button: ON
([FAX] LED: OFF/[COPY] LED: OFF/[SCAN] LED: ON)
Highlighted display Normal display
e.g. e.g.
A 4th drawer transport sensor Paper present No paper
B
3rd drawer transport sensor / Tandem LCF
transport sensor
Paper present No paper
C 2nd drawer transport sensor Paper present No paper
D 1st drawer transport sensor Paper present No paper
E
4th drawer feed sensor / End fence stop
position sensor
Paper present / After
the tray was moved
No paper / In cases
other than the noted
left
F 3rd drawer/tandem LCF feed sensor Paper present No paper
G 2nd drawer feed sensor Paper present No paper
H 1st drawer feed sensor Paper present No paper
A
4th drawer empty sensor / Tandem LCF
standby side empty sensor
No paper / No paper
Paper present/
Paper present
B 3rd drawer/tandem LCF empty sensor No paper / No paper
Paper present/
Paper present
C 2nd drawer empty sensor No paper Paper present
D 1st drawer empty sensor No paper Paper present
E
4th drawer detection sensor / Tandem LCF
bottom sensor
Drawer closed / Tray
lifted down
Drawer opened / In
cases other than the
noted left
F 3rd drawer/tandem LCF detection sensor Drawer closed Drawer opened
G 2nd drawer detection sensor Drawer closed Drawer opened
H 1st drawer detection sensor Drawer closed Drawer opened
A Bypass feed sensor No paper Paper present
B Bypass paper sensor No paper Paper present
C Bridge unit path exit sensor Paper present No paper
D Bridge unit path entrance sensor Paper present No paper
E Reverse sensor Paper present No paper
F Reverse path sensor Paper present No paper
G Duplexing unit path exit sensor Paper present No paper
H Duplexing unit path entrance sensor Paper present No paper
A
Reverse section stationary jam detection
Paper present No paper
B - - -
C - - -
D Tandem LCF connection detection Not connected Connected
E - - -
F
Duplexing unit cover opening/closing
detection sensor-1
Cover closed Cover opened
Duplexing unit opening/closing detection
sensor (PFC side)
(Refer to table 3)
H - - -
A - - -
B Option LCF connection detection Not connected Connected
C Option LCF installation sensor Not installed Installed
D Option LCF tray position sensor Tray unit opened Tray unit closed
E Option LCF feed sensor No paper Paper present
F Option LCF empty sensor No paper Paper present
G Option LCF bottom sensor Normal Lower limit position
H Option LCF top sensor Upper limit position Normal
[5]
[1]
[2]
[3]
[4]
Digital
key
Button It
ems to check
Contents
OFF (H) ON (L)G