Toshiba e-studio 6560c - Page 1303

e-STUDIO5540C/6540C/6550C
05/08
Mode
Element
Sub Element
Item
Subitem
Code
Sub-
Code
Details
Default
value
Acceptable
value
RAM
Contents
Proc
edure
ServiceUI
05
Adjustment for All (Y,M,C,K)
Sets the auto-toner sensor output and supply of
developer material automatically. The larger the
value, the larger the sensor output becomes.
Adjustment
mode
Process
Developer
Auto adj. for dev.
material supply
and ATS
2400
128
0~255
5
Yes
M
05
Adjustment for Y
Sets the auto-toner sensor output and supply of
developer material automatically. The larger the
value, the larger the sensor output becomes.
Adjustment
mode
Process
Developer
Auto adj. for dev.
material supply
and ATS
2401
128
0~255
5
Yes
M
05
Adjustment for M
Sets the auto-toner sensor output and supply of
developer material automatically. The larger the
value, the larger the sensor output becomes.
Adjustment
mode
Process
Developer
Auto adj. for dev.
material supply
and ATS
2402
128
0~255
5
Yes
M
05
Adjustment for C
Sets the auto-toner sensor output and supply of
developer material automatically. The larger the
value, the larger the sensor output becomes.
Adjustment
mode
Process
Developer
Auto adj. for dev.
material supply
and ATS
2403
128
0~255
5
Yes
M
05
Adjustment for K
Sets the auto-toner sensor output and supply of
developer material automatically. The larger the
value, the larger the sensor output becomes.
Adjustment
mode
Process
Developer
Auto adj. for dev.
material supply
and ATS
2404
128
0~255
5
Yes
M
05
Adjustment of (YMCK) Y
Adjustment
mode
Process
Developer
Adjustment of
auto-toner initial
adjustment
reference setting
value (YMCK)
2405
0
130
0~255
4
Yes
M
05
Adjustment of (YMCK) M
Adjustment
mode
Process
Developer
Adjustment of
auto-toner initial
adjustment
reference setting
value (YMCK)
2405
1
130
0~255
4
Yes
M
05
Adjustment of (YMCK) C
Adjustment
mode
Process
Developer
Adjustment of
auto-toner initial
adjustment
reference setting
value (YMCK)
2405
2
130
0~255
4
Yes
M
05
Adjustment of (YMCK) K
Adjustment
mode
Process
Developer
Adjustment of
auto-toner initial
adjustment
reference setting
value (YMCK)
2405
3
130
0~255
4
Yes
M
05
Adjustment for 3
colors(Y,M,C)
Sets the auto-toner sensor output and supply of
developer material automatically. The larger the
value, the larger the sensor output becomes.
Adjustment
mode
Process
Developer
Auto adj. for dev.
material supply
and ATS
2406
128
0~255
5
Yes
M
05
Forcible mixing in the
developer unit
Decelerates the rotation of each developer unit
mixer motor to mix the developer material in the
developer unit forcibly. Perform this code when the
process unit is
installed or removed.
Adjustment
mode
Process
Developer
2416
5
Yes
M
05
Manual forcible discharge of
developer material
Discharges developer material forcibly.
Adjustment
mode
Process
Developer
2417
5
M
05
Y
Judges the presence of the developer unit-K. If it is
judged as present, the input of this code will be
refused. (Unit: bit)
To perform this code, disconnect all the auto-toner
sensors in the EPU.
Adjustment
mode
Process
Charger
Main charger grid
bias adjustment
2461
73
0~255
3
M
1
Ver11
05 Adjustment Mode