e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 86
27.Waste toner box
This collects the residual toner scraped off on the drum surface by the cleaning blade and residual
toner scraped off on the transfer belt by the transfer belt cleaning blade.
Developer material discharged in SR development is also recovered into the waste toner box.
28.Waste toner box detection sensor (S16)
This sensor detects if the waste toner box is set and whether the waste toner box cover is opened or
closed.
29.Toner filter
This collects toner scattered out of the developer unit (developer sleeve).
30.Scattered toner suctioning fan (F25)
This fan sucks in toner scattered out of the developer unit (developer sleeve) and collects it through
the toner filter.
31.Toner cartridge paddle rotation detection sensor-K/C/M/Y(S8/S9/S10/S11)
These sensors detect the rotational status of the paddle of each toner cartridge. The rotational
status can be detected with an actuator rotating together with the paddle.
To Next Page
Loading...
