Toshiba e-studio 6560c - Page 1442

e-STUDIO5540C/6540C/6550C
05/08
Mode
Element
Sub Element
Item
Subitem
Code
Sub-
Code
Details
Default
value
Acceptable
value
RAM
Contents
Proc
edure
ServiceUI
05
Printed image
When the value decreases, the effect of reducing
streaks (set with 08-8300) becomes larger. When
the value increases, the effect of reducing streaks
(set with 08-8300) becomes smaller.
When the value is too small, text might be blurry.
When "0" is set, this function is disabled.
Adjustment
mode
Image
Processing
ADF scan
noise reduction
SCN(color)
8415
100
0~200
1
SYS
05
Photo (developing paper)
When the value decreases, the effect of reducing
streaks (set with 08-8300) becomes larger. When
the value increases, the effect of reducing streaks
(set with 08-8300) becomes smaller.
When the value is too small, text might be blurry.
When "0" is set, this function is disabled.
Adjustment
mode
Image
Processing
ADF scan
noise reduction
SCN(color)
8416
100
0~200
1
SYS
05
Equipment number (serial
number) display
If this code is performed, 08-9601 is performed. 7
digits out of 9 digits can be entered except for
upper 2 digits (fixed digits).
Adjustment
mode
System
Maintenance
9043
1
SYS
05
Media sensor position
adjustment
Checks the reference voltage of the media sensor
while no paper is inserted between the tray and
copy paper and adjusts the position of the sensor
accordingly.
Adjustment
mode
System
Feeding
system/Paper
transport
Media sensor
position
adjustment
9092
6
Yes
-
05
Compression quality of
SLIM PDF background
processing
0-10
0: High compression, low image quality
10: Low compression, high image quality
Adjustment
mode
System
Image
9104
5
0~10
1
SYS
05
Resolution of SLIM PDF
background processing
0: 75dpi
1: 100dpi
2: 150dpi
3: 200dpi
Adjustment
mode
System
Image
9107
1
0~3
1
SYS
05
When the value is entered for this code the ring
tone comes from the speaker at the set volume.
The set value is stored when the [INTERRUPT]
button is pressed.
Adjustment
mode
FAX
FAX
9850
4
0~7
12
SYS
05
Display of equipment
information (SRAM)
Displays the equipment information in SRAM.
0: Not set
1: Destinations other than NAD/NAC
2: NAD/NAC
<Default value>
NAD/NAC: 2
Others: 1
Adjustment
mode
System
Maintenance
9960
Refer to
contents
0~2
2
SYS
140
Ver11
05 Adjustment Mode