Toshiba e-studio 6560c - Page 346

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 172
4.9.1 Fuser unit
Notes:
Fuser unit [1] has a receiving dish that
prevents gear abrasion powder from
dropping into the machine. Take off fuser [1]
without substantial shaking or tilting.
Fig. 4-493
(1) Open the duplexing unit.
(2) Remove 1 screw and release the lock of the
handle grips.
Fig. 4-494
(3) Loosen 2 screws and then take off the fuser
unit by holding its handle grips.
Fig. 4-495
[
1
]
Handle