e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 196
(7) Disconnect the cables of the pressure roller
thermostats (center and side) from the
Faston terminal.
Fig. 4-567
Notes:
When the harness is installed, do not insert
the thermostat terminal between the Faston
terminal and the tube.
Fig. 4-568
(8) Remove 1 screw each and take off each
thermostat bracket of the pressure roller
center thermostat and the pressure roller
side thermostat.
Fig. 4-569
To Next Page
Loading...
