e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 248
(7) Remove 2 screws and a hook stay.
Fig. 4-721
(8) Remove 2 E-rings and 1 clip. Then remove 3
pulleys and 2 belts.
Fig. 4-722
(9) Remove an E-ring and a pulley.
Fig. 4-723
(10) Remove 2 E-rings and 2 bearings. Then take
off ADU transport roller-2.
Fig. 4-724
Hook stay
Shoulder screw
Shoulder screw
ADU transport roller-2
Bearing
Bearing
To Next Page
Loading...
