3
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
OUTLINE OF THE MACHINE
3 - 35
S103 4th drawer paper size detection
sensor-1
Detecting the size of paper in the 4th
drawer
Fig. 3-19 46-20
S104 4th drawer paper size detection
sensor-2
Detecting the size of paper in the 4th
drawer
Fig. 3-19 46-20
S106 Standby side tray paper amount
detection sensor
Detecting the remaining amount of
paper on the standby side tray in the
tandem LCF
Fig. 3-21 13-15
S107 Tandem LCF bottom sensor Detecting the descending status of the
trays in the tandem LCF
Fig. 3-21 14-32
S108 Standby side tray detection sensor Detecting the presence of the standby
side tray in the tandem LCF
Fig. 3-21 46-26
S109 Standby side empty sensor Detecting the presence of the paper at
the standby side of the tandem LCF
Fig. 3-21 13-15
S110 Stopper opening/closing detection
sensor (front)
Detecting the opening/closing status of
the front stopper in the tandem LCF
Fig. 3-21 14-32
S111 Stopper opening/closing detection
sensor (rear)
Detecting the opening/closing status of
the rear stopper in the tandem LCF
Fig. 3-21 14-32
S112 End fence home position sensor Detecting the end fence home position
in the tandem LCF
Fig. 3-21 13-15
S113 End fence stop position sensor Detecting the end fence stop position in
the tandem LCF
Fig. 3-21 13-15
S114 Feed cover sensor Detecting the opening/closing status of
the feed cover
Fig. 3-17 7-4
Symbol Name Function Remarks P-I
To Next Page
Loading...
