8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 105
[EF14] Saddle paper exit jam
[EF15] Saddle Stitch Finisher side alignment motor home position detection abnormality
Saddle controller board • Connector check (CN8)
• Board check
Replace parts Remarks
Paper holding home position sensor
(S38)
Saddle controller board
Classification Error item
Finisher jam (Saddle section)
Check item Measures
Finisher • Is there any paper remaining in the paper transport path of
the equipment or the saddle stitch section of the Finisher?
Exit sensor (S31) • Sensor check
• Connector check
• Harness check
Saddle controller board • Connector check (CN19)
• Board check
Replace parts Remarks
Exit sensor (S31)
Saddle controller board
Classification Error item
Finisher jam (Saddle section)
Check item Measures
Finisher • Is there any mechanical problem when the jog is moved?
Side alignment home position sensor
(S36)
• Sensor check
• Connector check
• Harness check
Side alignment motor (M15) • Motor check
• Connector check
• Harness check
Saddle controller board • Connector check (CN5)
• Board check
Replace parts Remarks
Side alignment home position sensor
(S36)
Side alignment motor (M15)
Saddle controller board
Check item Measures
To Next Page
Loading...
