8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 113
[C180] LCF tray-up motor abnormality
[C1A0] LCF end fence motor abnormality
PFC board • Connector check (CN504, CN505, CN506)
• Board check
Replace parts Remarks
Tray-up motor
Tray-up sensor
PFC board
Classification Error item
Paper feeding system related service
call
The LCF tray-up motor is not rotating or the LCF tray is not
moving normally. (the case that paper can be fed from any
drawer except the LCF
Check item Measures
LCF tray-up motor • Motor check
(Perform the output check: 03-257)
• Connector check
• Harness check
LCF tray-up sensor • Sensor check
(Perform the input check: 03-[COPY]ON/[9]/[F])
• Connector check
• Harness check
LCF tray bottom sensor • Sensor check
(Perform the input check: 03-[SCAN]ON/[2]/[E])
• Connector check
• Harness check
PFC board • Connector check (CN505, CN507)
• Board check
Replace parts Remarks
LCF tray-up motor
LCF tray-up sensor
LCF tray bottom sensor
PFC board
Classification Error item
Paper feeding system related service
call
The LCF end fence motor is not rotating or the LCF end fence
is not moving normally. (the case that paper can be fed from
any drawer except the LCF)
Check item Measures
LCF end fence motor • Motor check
(Perform the output check: 03-256)
• Connector check
• Harness check
Check item Measures
To Next Page
Loading...
