e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 132
[C8A0] RADF reverse motor abnormality
[C8B0] RADF exit motor abnormality
Replace parts Remarks
RADF read motor
RADF board Replace the RADF board, and then perform the automatic
adjustment for the original reading start sensor (05-3210).
Classification Error item
Optional communication related
service call
An error signal has been detected when the motor is rotating.
Check item Measures
RADF board • Connector check (CN77)
• Harness check
• Board check
RADF reverse motor (MR3) • Motor check
(Perform the output check: 03-286)
• Connector check
• Harness check
Replace parts Remarks
RADF reverse motor
RADF board Replace the RADF board, and then perform the automatic
adjustment for the original reading start sensor (05-3210).
Classification Error item
Optional communication related
service call
An error signal has been detected when the motor is rotating.
Check item Measures
RADF board • Connector check (CN78)
• Harness check
• Board check
RADF exit motor (MR4) • Motor check
(Perform the output check: 03-284)
• Connector check
• Harness check
Replace parts Remarks
RADF exit motor
RADF board Replace the RADF board, and then perform the automatic
adjustment for the original reading start sensor (05-3210).
To Next Page
Loading...
