8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 213
[1C14] Invalid parameter
[1C15] Exceeding file capacity
[1C30] Directory creation failure
[1C31] File creation failure
[1C33] File access failure
Check item Measures
Setting • Turn the power OFF and then back ON. Perform the job in
error again.
Replace parts Remarks
Classification Error item
Internet FAX related error
Check item Measures
Setting • When a template is used, form the template again.
• If the error still occurs, turn the power OFF and then back
ON, and perform the job again.
Replace parts Remarks
Classification Error item
Internet FAX related error
Check item Measures
Setting • Reset and extend the “Maximum send to E-mail/iFAX size”
or reduce the number of pages and perform the job again.
Replace parts Remarks
Classification Error item
Internet FAX related error
Check item Measures
Setting • Check if the access privilege to the storage directory is
writable.
• Check if the server or local disk has a sufficient space in
disk capacity.
Replace parts Remarks
To Next Page
Loading...
