UTT Technologies App Control Menu
http://www.uttglobal.com Page 121
Policy 1: It is used to allow the Customer Service and Sales Departments’
employees to use IM applications, and block all other applications during working
hours.
Policy 2: It is used to block the Technology and Financial Departments’
employees from accessing all the Internet applications during working hours.
Configuration Procedure
(1) Adding Policy 1
Step 1 Go to App Control > Application Control page, and click Add to go to
Internet Application Management Settings page.
Step 2 Make the following settings.
Enter CSD_SD in the Group Name text box.
Select the IP Range radio button, and enter 192.168.1.101 and
192.168.1.170 in the two text boxes.
Select the first Select All checkbox on the page, and then clear the Select All
check box next to
IM Software.
In the Schedule Settings section, clear the Every Day check box, and select
the
Mon, Tue, Wed, Thu and Fri check boxes. Next, choose 09:00 and 18:00
as the daily start time and end time.
Step 3 Click the Save button to add this policy to Application Management List.
(2) Adding Policy 2
Step 1 Go to User Management > User Group to add a user group for the
Customer Service and Sales Departments’ employees:
Group Name is
TD_SD_Group, Group Type is Address Group, and it contains two IP
address ranges: from 192.168.1.11 to 192.168.1.100, and from
192.168.1.171 to 192.168.1.180.
Step 2 Go to App Control > Application Control page, and click Add to go to
Internet Application Management Settings page.
Step 4 Make the following settings.
Enter TD_SD in the Group Name text box.
Select the User Group radio button and select TD_SD_Group from the
drop-down list.
To Next Page
Loading...
