UTT AC750W - Time Settings

UTT Technologies VPN Menu
http://www.uttglobal.com Page 182
default values, and the preferred phase 2 proposal is esp-aes256-md5; in addition,
the preshared key is testing, and the IP addresses are as follows:
The Device at the head office:
 WAN Interface IP Address: 200.200.202.123/24
 Default Gateway IP Address: 200.200.202.254/24
 LAN Interface IP Address: 192.168.123.1/24
The Device at the branch office:
 WAN Interface IP Address: 200.200.202.16/24
 Default Gateway IP Address: 200.200.202.254/24
 LAN Interface IP Address: 192.168.16.1/24
1) Configuring the Device at the head office
Go to the VPN > IPSec > IPSec Settings page, make the following settings (leave the
default values for the other parameters), and then click the
Save button.
Connection Type Bidirectional
Gateway IP/Domain Name
(Remote)
200.200.202.16
Subnet IP (Remote) 192.168.16.1
Subnet Mask (Remote) 255.255.255.0
Bind to (Local) WAN1
Subnet IP (Local) 192.168.123.1
Subnet Mask (Local) 255.255.255.0
Preshared Key testing
P2 Encrypt/Auth Algorithms 1 esp-aes256-md5
2) Configuring the Device at the branch office
Go to the VPN > IPSec > IPSec Settings page, make the following settings (leave the
default values for the other parameters), and then click the
Save button.