3
Transducer id for Hail peak intensity
*
Checksum delimiter
51
Two-character checksum for the response
<cr><lf>
Response terminator
The structure of the supervisor response message:
$
Start of the message
WI
Device type (WI = weather instrument)
XDR
Transducer measurement response identifier
C
Transducer id 2 type (temperature), see the following Transducer table
20.4
Transducer id 2 data (Heating temperature)
C
Transducer id 2 units (C, Heating temperature)
2
Transducer id for Heating temperature
U
Transducer id 0 type (voltage)
12.0
Transducer id 0 data (Heating voltage)
M
Transducer id 0 units (N = heating disabled or heating temperature too high Heating
v
oltage
)
0
Transducer id for Heating voltage
U
Transducer id 1 type (Supply voltage)
12.5
Transducer id 1 data (Supply voltage)
V
Transducer id 1 units (V, Supply voltage)
1
Transducer id for Supply voltage
U
Transducer id 2 type (voltage)
3.460
Transducer id 2 data (3.5 V reference voltage)
V
Transducer id 2 units (V, 3.5 V reference voltage)
2
Transducer id for 3.5 V reference voltage
G
Transducer id 4 type (generic)
HEL/___
Transducer id 4 data (info field)
Transducer id 4 units (none, null)
4
Transducer id for generic field
*
Checksum delimiter
2D
Two-character CRC for the response.
<cr><lf>
Response terminator
WXT530 Series User Guide M211840EN-D
112
sales@streamlinemeasurement.co.uk
www.streamlinemeasurement.co.uk
To Next Page
Loading...
