Vaisala WXT530 Series - Setting Fields

$
Start of the message
WI
Device type (WI = weather instrument)
XDR
Transducer measurement response identifier
V
Transducer id 0 type (Accumulated rainfall)
0.02
Transducer id 0 data (Accumulated rainfall)
I
Transducer id 0 units (mm, Accumulated rainfall)
0
Transducer id for Accumulated rainfall
Z
Transducer id 0 type (Rain duration)
30
Transducer id 0 data (Rain duration)
s
Transducer id 0 units (s, Rain duration)
0
Transducer id for Rain duration
R
Transducer id 0 type (Rain intensity)
2.7
Transducer id 0 data (Rain intensity)
M
Transducer id 0 units (mm/h, Rain intensity)
0
Transducer id for Rain intensity
V
Transducer id 1 type (Hail accumulation)
0.0
Transducer id 1 data (Hail accumulation)
M
Transducer id 1 units (hits/cm2, Hail accumulation)
1
Transducer id for Hail accumulation
Z
Transducer id 1 type (Hail duration)
0
Transducer id 1 data (Hail duration)
s
Transducer id 1 units (s, Hail duration)
1
Transducer id for Hail duration
R
Transducer id 1 type (Hail intensity)
0.0
Transducer id 1 data (Hail intensity)
M
Transducer id 1 units (hits/cm2h, Hail intensity)
1
Transducer id for Hail intensity
R
Transducer id 1 type (Rain peak intensity)
6.3
Transducer id 1 data (Rain peak intensity)
M
Transducer id 1 units (mm/h, Rain peak intensity)
2
Transducer id for Rain peak intensity
R
Transducer id 1 type (Hail peak intensity)
0.0
Transducer id 1 data (Hail peak intensity)
M
Transducer id 1 units (hits/cm2, Hail peak intensity)
Chapter 7 – Retrieving Data Messages
111
sales@streamlinemeasurement.co.uk
01457-864334
www.streamlinemeasurement.co.uk