Vanderbilt SPC42 Series User Manual

EN50131 Requirement (and relevant section) Relevant Vanderbilt documentation
If automatic setting at pre-determined times provided, details of
pre-setting indication and any automatic over-ride of prevention
of set (see 8.3.3, 8.3.3.1)
Setting/Unsetting on page275
Details of conditions provided for the set state (see 8.3.3.4) Setting/Unsetting on page275
LCD Keypad Settings on page126
Comfort Keypad Settings on page127
Editing an output on page231
Zone types on page379
Notification of output signals or messages provided (see 8.6) Editing an output on page231
Setting/Unsetting on page275
User rights on page200
Other output configurations to interface with I&HAS
components (see 8.2)
Editing an output on page231
Zone types on page379
Test on page162
Keypad user interface on page93
Criteria for automatic removal of “soak test” attribute (see 8.3.9) Timers on page261
Number of events resulting in automatic inhibit Automatic inhibits on page376
If ACE is Type A or Type B (see 8.7) and whether portable or
moveable (see 11.14)
All devices are hardwired and powered by
system PSUs. See the relevant technical data
on PSUs (separate documents).
Component data for non-volatile memory components (see
Table 30, step 6)
See user documentation for SPCK420/421 and
SPCK620/623 keypads.
Life of memory support battery (see 8.10.1) N/A. Stored in non-volatile memory.
Optional functions provided (see 4.1) Engineer programming via the keypad on
page112
Engineer programming via the browser on
page172
Additional functions provided (see 4.2, 8.1.8) Unrestricted Grade on page268
Options on page252
Access levels required to access such additional functions
provided
Edit on page135
User configuration (browser) - see
Adding/Editing a User on page196
Details of any programmable facility that would render an
I&HAS non-compliant with EN 50131-1:2006, 8.3.13 or
compliant at a lower security grade, with instruction on
consequent removal of compliance labeling (see 4.2 and
8.3.10).
Unrestricted Grade on page268
Options on page252
Compliance with EN50131 Approvals on
page20
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Directives and standards
© Vanderbilt 2018 18 A6V10276959-d
11.2018

Vanderbilt SPC42 Series Specifications

General

Brand	Vanderbilt
Model	SPC42 Series
Category	Power Supply
Language	English