10-6 SHB WL34 * 2.0
10 Trim
Rear covers
1. Remove the engine cover – see “Removing/installing the engine
cover” on page 10-1.
2. Disconnect the plug connection of the lighting 1 and guide the cable to
the rear weight.
3. Remove the rear lights and reflectors.
4. Attach the lifting eyes on both sides.
5. Pull the round sling through the lifting eyes and lightly tighten the lifting
equipment
6. Slightly tension the lifting equipment.
7. Remove the fastening screws 2 and carefully remove the rear weight.
Install in the reverse order.
To Next Page
Loading...
