WM 68401 04/2021
MEDUCORE Standard
2
EN 209
6 Operation
5. Use the Amplitude function button to adapt the amplitude
scaling to adapt the displayed height of the ECG curve to the
ECG measuring signal.
6. Use the Feed function button to adapt the feed rate of the
ECG curve.
7. Use the ffw function button to adapt the scrolling resolution.
8. Shift the session as from the time of the event using the
navigation knob.
9. Analyze the event in the session.
10. If desired (only with Printing option): Print the replay view of
the event (see “6.16.6 Printing replay view (only with Printing
and Replay view options)”, page 203).
Result A session has been analyzed in replay view on the device.
6.17.3 Analyzing and delivering a 12-lead ECG of a
session (only with 12-lead ECG option)
Requirement • The 12-lead ECG option is enabled and activated (see “13.12
System settings”, page 342).
• If e-mail delivery 12-lead ECG is desired: A default network has
been configured (see “12.3 Configuring default network”,
page 292).
1. Select a session with at least one 12-lead ECG (Yes in the 12-
lead column) in the session archive (see “6.17.1 Selecting a
session in the session archive”, page 205).
2. Confirm with the OK function button.
3. Select the Display 12-lead ECG menu item.
The device displays all 12-lead ECGs recorded during the
selected session.
To Next Page
Loading...
Need help?
General
