Weinmann MEDUCORE Standard2 User Manual

WM 68401 04/2021
MEDUCORE Standard
2
EN 219
7 Disassembling
7.1.2 Disconnecting the device from line power
Requirement The device is switched off.
1. When used in a protective transport bag: Open the rear of the
device compartment of the protective transport bag.
2. Disconnect the charging adapter from the power supply
connection.
3. Disconnect the charging adapter from the power supply unit
and charger.
4. Disconnect the power supply unit and charger from line power.
Result The device is disconnected from line power.

Weinmann MEDUCORE Standard2 Specifications

General

Brand	Weinmann
Model	MEDUCORE Standard2
Category	Medical Equipment
Language	English