Weinmann MEDUCORE Standard2 - Page 245

WM 68401 04/2021
MEDUCORE Standard
2
EN 245
8 Hygienic reprocessing
Printing
Printer
Wipe down with
neodisher
®
MediClean forte
(Dr. Weigert).
Dose:
10 ml/l
Wipe down all
surfaces at least
2x until they
look clean.
Wipe down all
surfaces with
Incidin™
OxyWipe S
(Ecolab).
Exposure time:
5 min
Not permitted Not permitted Not permitted
Printer battery
Charging station
for printer
battery with
power supply
unit and charger
Quadruple
charging station
for printer
battery including
power supply
unit and charger
Part
Manual
cleaning
(only
necessary in
the event of
visible dirt)
Disinfection
by wiping
Disinfection
by
immersion
Mechanical
reprocessing
Sterilization