WM 68401 04/2021
MEDUCORE Standard
2
EN 269
11 Alarms and faults
11-1 Alarm line with VF/VT alarm (example)
The device displays alarms as follows:
• As text in the alarm line in the display
• As audio alarm tones (via the loudspeaker)
• With the alarm light (in the top right-hand corner on the front
of the device)
Alarms are outputted according to their priority:
Type of alarm
signal
High priority
Medium
priority
Low priority
Alarm line
Flashing
frequency
2 Hz 0.5 Hz
Not flashing
(constantly on)
Size 90 mm x 5 mm
Color Red Yellow Turquoise
Signal ratio 1:1 1:1 100 % (on)
To Next Page
Loading...
Need help?
General
