Weinmann MEDUCORE Standard2 - Page 346

346 EN MEDUCORE Standard
2
WM 68401 04/2021
13 Operator menu
Disable functions
Operator menu - Here you can disable
functions for the user and
protect them from
unauthorized access using an
individual access code. When
doing so, please note:
• Manual mode cannot be
disabled if it has been
selected as the start
mode.
• Curve view cannot be
disabled if it has been
selected as the start
view.
• If manual mode and
curve view are disabled
at the same time, then
when manual mode is
enabled in the session,
curve view is
automatically enabled at
the same time.
• The access code request
in the operator menu
cannot be removed.
Functions not
disabled
Access code:
000000
Manual mode
(only with
Manual
defibrillation
option)
-
Cardioversion
(only with
Cardioversion
option)
-
Curve view -
Venous stasis -
12-lead ECG
(only with 12-
lead ECG option)
-
12-lead ECG
settings (only
with 12-lead ECG
option)
-
Session archive -
Replay view (only
with Replay view
option)
-
Reset all access
codes
-
Here you can reset all access
codes to the factory setting
000000.
-
Parameter
Possible
values
Description
Factory
setting