Weinmann MEDUCORE Standard2 User Manual

WM 68401 04/2021
MEDUCORE Standard
2
EN 81
4 Preparation
18. Connect the pulse oximetry sensor connecting cable to the
device and to the pulse oximetry sensor (see “6.9.1 Preparing
pulse oximetry monitoring”, page 157).
When doing so, please note: MCS2-SoftTip pulse oximetry
sensors which have been turned inside out during hygienic
reprocessing must be turned the right way out again.
19. Wind up the pulse oximetry sensor connecting cable and the
cable for the pulse oximetry sensor and stow them in the side
compartment.

Weinmann MEDUCORE Standard2 Specifications

General

Brand	Weinmann
Model	MEDUCORE Standard2
Category	Medical Equipment
Language	English