82 EN MEDUCORE Standard
2
WM 68401 04/2021
4 Preparation
20. Connect the selected ECG cable to the device (see “6.10.1
Preparing 6-lead ECG monitoring”, page 164).
21. Wind up the ECG cable and stow it in the side compartment.
22. Stow ECG electrodes in their pack in the side compartment.
23. If a printer is in use (only with Printing option): Stow the printer
case in the protective transport bag.
Alternatively:
Mount the printer case on the protective transport bag (see
“4.7.5 Mounting the printer case on the protective transport
bag or the protective bag of the portable unit”, page 101).
24. Stow further components and accessories in the side
compartments.
When doing so, please note:
• Components and accessories must be stowed so that they
do not interfere with one another when removed.
• Components and accessories must be stowed so that the
viewing window and the side compartments can be closed
easily and securely.
25. Close side compartments and viewing window.
Result Components and accessories are stowed in the protective
transport bag.
To Next Page
Loading...
Need help?
General
