Weinmann MEDUCORE Standard2 - Page 101

WM 68401 04/2021
MEDUCORE Standard
2
EN 101
4 Preparation
4. Guide printer paper through the slot in the printer case to the
outside.
5. Close the zip on the printer case.
Result The printer is stowed in the printer case ready for printing.
4.7.5 Mounting the printer case on the protective
transport bag or the protective bag of the
portable unit
Requirement • The printer battery is inserted (see “4.7.2 Inserting the printer
battery”, page 97).
• The printer paper is inserted (see “4.7.3 Inserting printer
paper”, page 98).
• The printer is stowed in the printer case (see “4.7.4 Stowing
the printer in the printer case”, page 100).
• A protective transport bag with a side holder for a printer case
is being used.
Alternatively:
A protective bag of the portable unit with a side holder for a
printer case is being used.