WinGD X72 - Page 24

Operation0020−1/A1
Table of Contents
Winterthur Gas & Diesel Ltd.
2/ 4
2016-11
Operation during Unusual Conditions
General Data 0500−1/A1........................................................................
Operation with Injection Cut Out (One or More Cylinders) 0510−1/A1.................................
Faults in High Pressure Fuel System 0515−1/A1...................................................
Operation with Exhaust Valve Control Unit Cut Out 0520−1/A1.......................................
Faults in Servo Oil System 0525−1/A1............................................................
CCM−20 Failure 0530−1/A1.....................................................................
Operation with Running Gear Partially or Fully Removed 0540−1/A1..................................
Operation with Water Leakage into the Combustion Chamber 0545−1/A1.............................
Defective Scavenge Air Cooler / Defective Auxiliary Blowers 0550−1/A1..............................
Defective Remote Control 0560−1/A1.............................................................
Defective Speed Control System 0570−1/A1.......................................................
Defective Turbocharger 0590−1/A1...............................................................
Special Procedures Before and After Operation
Prepare for Engine Start after a Long Shutdown Period or an Overhaul 0610−1/A1.....................
Prepare the Engine for a Long Shutdown Period 0620−1/A1.........................................
Operating Media
Diesel Engine Fuels 0710−1/A1..................................................................
Fuel Treatment and Fuel System 0720−1/A1......................................................
Scavenge Air and Starting Air 0740−1/A1.........................................................
Lubricating Oils 0750−1/A1......................................................................
Cooling Water / Cooling Water Treatment 0760−1/A1
...............................................
Problems during Operation
General 0800−1/A1............................................................................
Problems During Engine Start and Stop 0810−1/A1................................................
Irregular Operation 0820−1/A1...................................................................
Problems and Damage to Engine Parts 0840−1/A1.................................................
Bedplate and Tie Rod Group 1
Main Bearing 1132−1/A1...........................................................................
Thrust Bearing 1203−1/A1..........................................................................
Tie Rod 1903−1/A1.................................................................................
Cylinder Liner and Cylinder Cover Group 2
Cylinder Liner 2124−1/A1...........................................................................
Lubricating Quills on Cylinder Liner 2138−1/A1......................................................
Piston Rod Gland 2303−1/A1.......................................................................
Injection Valve (FAST Nozzle) 2722−1/A1............................................................
Starting Valve 2728−1/A1...........................................................................
Exhaust Valve 2751−1/A1...........................................................................