Yealink T21PE2 - Screensaver File Elements and Attributes

Phone Customization
107
Screensaver File Elements and Attributes
The following table lists the elements and attributes you can use to add custom information in the screensaver file. We
recommend you do not edit these elements and attributes.
Elements Attributes
Description
YealinkIPPhoneCustomScreenSaver
LineSpacing The vertical distance between different lines.
InsertImageLineNum
Specify which line to insert the image (configured by the
Image element).
For T48S/G IP phones: Integer from 0 to 11
For T54S/T52S/T46S/T46G/T29G IP phones: Integer from 0 to
8
Note: It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
SystemTime
Size
horizontalAlign
verticalAlign
Color
Specify “show” or “hide” between <SystemTime > and </Sys-
temTime > to decide whether to display the time and date.
Edit the attributes to decide how to display the time and
date, including the size, position and color.
Note: Color is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
StatusIcons
horizontalAlign
verticalAlign
Specify “show” or “hide” between <StatusIcons> and
</StatusIcons> to decide whether to display the status
icons.
Edit the attributes to decide the icons displayed position.
Line
Size
Align
Color
Specify the display text between <Line> and </Line>.
Edit the attributes to decide how to display the text, includ-
ing text size, position and color.
Note: The T48S/G IP phones support displaying up to 11
lines of contents; T54S/T52S/T46S/T46G/T29G/T27G IP
phones support displaying up to 8 lines of contents;
T42S/T42G/T41P/T41S/T23P/T23G/T21(P) E2/T19(P) E2/CP920
IP phones support displaying up to 4 lines of contents. Color
is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G
IP phones.
Image
horizontalAlign
verticalAlign
height
width
Specify the display image source between <Image> and
</Image>.
Edit the attributes to decide how to display the image, includ-
ing position and size.
Note: It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones. Ver-
ticalAlign works only if you do not configure Inser-
tImageLineNum or set the InsertImageLineNum to 0.