Yealink T21PE2 - Group Call Pickup; Group Call Pickup Configuration

Advanced Features
399
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for T41P/T41S/T27G,
X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
Group Call Pickup
Group call pickup is used for picking up incoming calls within a pre-defined group. When any phone within a pre-
defined group of phones receives an incoming call, you can pick up that call easily on the phone.
If you enable group call pickup, the phone screen will display a GPickup soft key when picking up the handset, press-
ing the Speakerphone key or pressing the line key. As shown below:
You can pick up the group incoming call using the GPickup soft key.
Tip
You can set a DSS key as a Group Pickup key to pick up a group call. For more information, refer to DSS Keys.
Topic
Group Call Pickup Configuration
Group Call Pickup Configuration
The following table lists the parameters you can use to configure group call pickup.
Parameter features.pickup.group_pickup_enable <y0000000000xx>.cfg
Description It enables or disables the user to use GPickup soft key when performing group call pickup feature.
Permitted
Values
0-Disabled
1-Enabled, the phone will display the GPickup soft key on the Dialing screen.
Default 0
Web UI Features->Pick up & Park->Group Call Pickup
Parameter features.pickup.group_pickup_code <y0000000000xx>.cfg
Description
It configures the group call pickup code on a phone basis.
Note: The group call pickup code configured on a per-line basis (configured by the parameter “accoun-
t.X.group_pickup_code”) takes precedence over that configured on a phone basis (configured by the para-
meter “features.pickup.group_pickup_code”).
Permitted
Values
String within 32 characters