Yealink T21PE2 - Web Server Type Configuration

Phone Provisioning
71
Permitted
Values
String
If it is left blank, you are only allowed to use IP address to access the web user interface of the IP phone.
If it is set to “any”, you can use IP address or any domain name to access the web user interface of the IP
phone.
Default any
Web Server Type Configuration
Yealink IP phones support both HTTP and HTTPS protocols for accessing the web user interface. You can configure the
web server type. Web server type determines access protocol of the web user interface. If you disable to access web
user interface using the HTTP/HTTPS protocol, both you and the user cannot access the web user interface.
The following table lists the parameters you can use to configure web server type.
Parameter
static.wui.http_enable
[1]
<y0000000000xx>.cfg
Description It enables or disables the user to access the web user interface of the IP phone using the HTTP protocol.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Network->Advanced->Web Server->HTTP
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTP Status
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin) ->Network->Web Server->HTTP Status
Parameter
static.network.port.http
[1]
<y0000000000xx>.cfg
Description
It configures the HTTP port for the user to access the web user interface of the IP phone using the HTTP
protocol.
Permitted
Values
Integer from 1 to 65535
Default 80
Web UI Network->Advanced->Web Server->HTTP Port (1~65535)
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Advanced (default password: admin) ->Network->Web Server->HTTP Port
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Advanced Settings (default password: admin) ->Network->Web Server->HTTP Port
Parameter
static.wui.https_enable
[1]
<y0000000000xx>.cfg
Description It enables or disables the user to access the web user interface of the IP phone using the HTTPS protocol.
Permitted
Values
0-Disabled
1-Enabled
Default 1