Yealink T21PE2 - Configuration Parameters; Broadsoft Parameters; Broadsoft Settings; Broadsoft UC

Configuration Parameters
483
Configuration Parameters
This section provides a description and permitted values of some settings.
Topics
BroadSoft Parameters
Start2Start ACD Parameters
Ethernet Interface MTU Parameter
SIP Settings Parameters
Call Settings Parameters
BroadSoft Parameters
This section shows the parameters you can use to configure the phone with BroadSoft server.
For more information on BSFT, refer to Yealink_IP_Phone_Features_Integrated_with_BroadSoft_UC-One_User_Guide or
Yealink_IP_Phones_Deployment_Guide_for_BroadSoft_UC-One_Environment.
BroadSoft Settings
Parameter
bw.enable
[1]
<y0000000000xx>.cfg
Description It enables or disables the BroadSoft features for IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.
Broadsoft UC
Parameter
bw.xmpp.enable
[1]
<y0000000000xx>.cfg
Description
It enables or disables the UC feature.
Note: It works only if “bw.enable" is set to 1 (Enabled). It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter features.uc_username <y0000000000xx>.cfg
Description
It configures the user name for UC authentication.
Note: It works only if “bw.xmpp.enable" is set to 1 (Enabled). It is only applicable to
T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
Permitted
Values
String within 99 characters
Default Blank
Web UI Applications->Broadsoft XMPPI->XMPP Account->XMPP UserName (if bw.xmpp.enable =1)
Parameter features.uc_password <y0000000000xx>.cfg