Yealink T21PE2 - Recent Call Display in Dialing; Recent Call in Dialing Configuration

Phone Customization
193
Parameter search_in_dialing.remote_phone_book.priority <y0000000000xx>.cfg
Description It configures the search priority of the remote phone book.
Permitted
Values
Integer greater than or equal to 0
Default 3
Web UI Directory->Setting->Search Source List In Dialing
Parameter search_in_dialing.ldap.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to automatically search entries from the LDAP, and display results on
the pre-dialing/dialing screen.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Directory->Setting->Search Source List In Dialing
Parameter search_in_dialing.ldap.priority <y0000000000xx>.cfg
Description It configures the search priority of the LDAP.
Permitted
Values
Integer greater than or equal to 0
Default 4
Web UI Directory->Setting->Search Source List In Dialing
Recent Call Display in Dialing
Recent call display allows you to view the placed calls list when the phone is on the dialing screen (lifts the handset,
presses the Speakerphone key or desired line key). You can select to place a call from the placed calls list.
The following shows the recent calls displayed on T46S/G IP phones:
Topic
Recent Call in Dialing Configuration
Recent Call in Dialing Configuration
The following table lists the parameter you can use to configure the recent call display in dialing.