Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
344
Tones Configuration
Supported Tones
The default tones used on IP phones are the US tone sets. Available tone sets for IP phones:
l Australia
l Austria
l Brazil
l Belgium
l China
l Czech
l Denmark
l Finland
l France
l Germany
l Great Britain
l Greece
l Hungary
l Lithuania
l India
l Italy
l Japan
l Mexico
l New Zealand
l Netherlands
l Norway
l Portugal
l Spain
l Switzerland
l Sweden
l Russia
l United States
l Chile
l Czech ETSI
Configured tones can be heard on IP phones in the following conditions.
Condition Description
Dial When in the dialing interface
Secondary
Dial
When adding a comma “,” to the digit map (For more information on digit map, refer to Dial Plan Defined
by Digit Map (New Dial Plan Mechanism))
Ring Back Ring-back tone
Busy When the callee is busy
Congestion When the network is congested
To Next Page
Loading...
