Yealink T21PE2 - Call Completion Configuration; Example: Using Call Completion

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
404
Contact: <sip:1000@10.10.20.31:5060>
Content-Type: application/dialog-info+xml
Max-Forwards: 70
User-Agent: Yealink SIP-T46G 28.82.0.20
Subscription-State: active;expires=48
Event: dialog
Content-Length: 217
<?xml version="1.0"?>
<dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="4" state="partial" entity-
y="sip:1000@10.2.1.48:5060">
<dialog id="65644">
<state>terminated</state>
</dialog>
</dialog-info>
Topics
Call Completion Configuration
Example: Using Call Completion
Call Completion Configuration
The following table lists the parameters you can use to configure call completion feature.
Parameter features.call_completion_enable <y0000000000xx>.cfg
Description
It enables or disables the call completion feature. If a user places a call and the callee is temporarily
unavailable to answer the call, call completion feature allows notifying the user when the callee becomes
available to receive a call.
Permitted
Values
0-Disabled
1-Enabled, the caller is notified when the callee becomes available to receive a call.
Default 0
Web UI Features->General Information->Call Completion
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Features->Others->Call Completion->Call Completion
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Features->Call Completion->Call Completion
Example: Using Call Completion
The following example shows the configuration for call completion.