Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
466
Values
Default Blank
Parameter features.xml_browser.pwd <y0000000000xx>.cfg
Description It configures the authentication password for XML request.
Permitted
Values
String within 15 characters
Default Blank
Parameter push_xml.username <y0000000000xx>.cfg
Description It configures the user name for the IP phone to authenticate with the push XML server.
Permitted
Values
String
Leave it blank if no authentication is required.
Default Blank
Web UI Features->Remote Control->User Name
Parameter push_xml.password <y0000000000xx>.cfg
Description
It configures the password for the IP phone to authenticate with the push XML server.
Leave it blank if no authentication is required.
Permitted
Values
String within 15 characters
Default Blank
Web UI Features->Remote Control->Password
Parameter features.upload_server <y0000000000xx>.cfg
Description
It configures the server address which the DssKey.cfg file is uploaded to when the phone receives an XML
command (Command:UploadSystemInfo).
Permitted
Values
URL within 1024 characters
Default Blank
Hot Desking
A primary motivation for hot desking is cost reduction. Hot desking is regularly used in places where not all employees
are in the office at the same time, or not in the office for a long time, which means actual personal offices would often
be vacant, consuming valuable space and resources.
Hot desking allows the user to clear pre-registration configurations of all accounts on the IP phone.
To use this feature, you need to assign a Hot Desking key. You can also specify which registration configurations are
available for the users. It is not applicable to CP920 IP phones.
Topics
Hot Desking Key Configuration
Hot Desking Configuration
To Next Page
Loading...
Need help?
General
