Yealink T21PE2 - Broadsoft Flexible Seating

Configuration Parameters
497
Description It configures the password used to log into the guest profile.
Permitted
Values
String within 99 characters
Default Blank
Parameter
features.homescreen_softkey.hoteling.enable
[2]
<y0000000000xx>.cfg
Description
It enables or disables the IP phone to display the Hoteling soft keys such as GuestIn or GuestOut on the
idle screen.
Note: It works only if “account.X.hoteling.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Parameter hoteling.authentication_mode <y0000000000xx>.cfg
Description
It configures the hoteling authentication mode.
Note: It works only if “account.X.hoteling.enable” is set to 1 (Enabled).
Permitted
Values
0-The phone uses the hoteling user ID and password as authentication credentials.
1-The phone uses the provisioning user name and password as authentication credentials, and at the
same time provides the hoteling user ID and password in the payload of the message for authentication
credentials.
Default 0
Parameter
account.X.hoteling.expires
[1]
<MAC>.cfg
Description It configures the hoteling subscription expiration time (in seconds).
Permitted
Values
Integer from 30 to 2147483647
Default 3600
Parameter
account.X.hoteling.auto_login_enable
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to save login credentials automatically when logging into the guest
profile.
Permitted
Values
0-Disabled
1-Enabled
Default 0
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for T41P/T41S/T27G.
Broadsoft Flexible Seating
Parameter
account.X.flexible_seating.enable
[1]
<MAC>.cfg
Description
It enables or disables the flexible seating feature.
Note: For host, it works only if “account.X.hoteling.enable” and “account.X.acd.enable” are set to 0 (Dis-
abled).
Permitted
Values
0-Disabled
1-Enabled