Phone Provisioning
81
Viewing Configurations Configured via Different Provisioning Methods
On the web user interface, you can click after each configuration to see its detailed information. It is only applic-
able to T48S/T46S/T42S/T41S/T27G/CP920 IP phones.
From the detailed information, you can do the following:
l Check whether settings you make using a higher priority provisioning method override settings made using a lower
priority provisioning method.
l Reset a configuration to factory setting.
l See the default value of the desired configuration.
The table lists each parameter in the detailed information.
Parameter Description
Description Description of this configuration item
CFG Configuration The parameter in the configuration file
Valid Value The permitted values
Configuration Source Values (This
appears only when the parameter “stat-
ic.auto_provision.custom.protect” is
set to 1.)
Web/Local:
(It appears only for a
non-static parameter.)
Not Applicable: the value is not changed via phone or
web user interface.
Specific value: the value is changed via phone or web
user interface. Click Reset to reset the value.
Config:
(It appears only for a
non-static parameter.)
Not Applicable: the parameter is not changed in the
configuration files.
Specific value: the parameter is changed in the con-
figuration files. Click Reset to reset the value.
Static:
(It appears only for a
static parameter)
Not Applicable: the parameter is not configured in
any provisioning method.
Specific value: the value is configured in any pro-
visioning method. Click Reset to reset the value.
Default: Default value
Setting Up a Provisioning Server
You can use a provisioning server to configure your IP phones. A provisioning server allows for flexibility in upgrading,
maintaining and configuring the phone. Boot files, configuration files and resource files are normally located on this
server.
Topics
Supported Provisioning Protocols
Supported Provisioning Server Discovery Methods
Configuring a Provisioning Server
To Next Page
Loading...
