Yealink T21PE2 - Auto Redial; Auto Redial Configuration

Call Features
281
Auto Redial
You can set the phone automatically redial the last dialed number when the callee is temporarily unavailable. Both the
number of attempts and waiting time between redials are configurable.
Topic
Auto Redial Configuration
Auto Redial Configuration
The following table lists the parameters you can use to configure auto redial.
Parameter auto_redial.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to automatically redial the last dialed number when the callee is tem-
porarily unavailable.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Features->General Information->Auto Redial
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Features->Others->Auto Redial->Auto Redial
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Features->Auto Redial->Auto Redial
Parameter auto_redial.interval <y0000000000xx>.cfg
Description
It configures the interval (in seconds) for the IP phone to wait between redials.
The IP phone redials the last dialed number at regular intervals till the callee answers the call.
Permitted
Values
Integer from 1 to 300
Default 10
Web UI Features->General Information->Auto Redial Interval (1~300s)
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Features->Others->Auto Redial->Redial Interval
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Features->Auto Redial->Redial Interval
Parameter auto_redial.times <y0000000000xx>.cfg
Description
It configures the auto redial times when the callee is temporarily unavailable.
The IP phone tries to redial the callee as many times as configured till the callee answers the call.
Permitted
Values
Integer from 1 to 300
Default 10
Web UI Features->General Information->Auto Redial Times (1~300)