Yealink T21PE2 - Phone Lock Configuration

Security Features
379
All Keys
Function
Keys
Menu key
hook key and on-hook key.
Note: Pressing X key to end the call is not applicable to T23P/T23G/T21(P)
E2/T19(P) E2/CP920 IP phones; Line key is not applicable to SIP-T19(P) E2 and
CP920 IP phones. HEADSET and Speakerphone key is not applicable to CP920
IP phones. Off-hook key and on-hook key are only applicable to CP920 IP
phones.
Phone Lock Configuration
The following table lists the parameters you can use to configure the phone lock.
Parameter phone_setting.phone_lock.enable <y0000000000xx>.cfg
Description It enables or disables the phone lock feature.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Features->Phone Lock->Phone Lock Enable
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Phone Lock->Lock Enable
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Basic Settings->Phone Lock->Lock Enable
Parameter phone_setting.phone_lock.lock_key_type <y0000000000xx>.cfg
Description
It configures the type of phone lock.
Note: It works only if “phone_setting.phone_lock.enable” is set to 1 (Enabled). It is not applicable to
T48S/G IP phones.
Permitted
Values
0-All Keys
1-Function Keys
2-Menu Key
Default 0
Web UI Features->Phone Lock->Phone Lock Type
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Phone Lock->Lock Type
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Basic Settings->Phone Lock->Lock Type
Parameter phone_setting.phone_lock.unlock_pin <y0000000000xx>.cfg
Description It configures the password for unlocking the phone.
Permitted
Values
Characters within 15 digits