Advanced Features
443
Variable Value Description
$ehs_number The number of the connected EHS.
$udisk_number The number of the connected USB flash drives.
$usbheadset_
number
The number of the connected USB headset devices.
$wifi_number The number of the connected Wi-Fi dongles.
$bluetooth_num-
ber
The number of the connected Bluetooth dongles.
Action URL Configuration
The following table lists the parameters you can use to configure action URL.
Parameter action_url.setup_completed <y0000000000xx>.cfg
Description
It configures the action URL the IP phone sends after startup.
The value format is: http(s)://IP address of server/help.xml?variable name=variable value.
Valid variable values are:
l $mac
l $ip
l $model
l $firmware
l $active_url
l $active_user
l $active_host
l $local
l $remote
l $display_local
l $display_remote
l $call_id
l $callerID
l $calledNumber
l $exp_number
l $ehs_number
l $udisk_number
l $usbheadset_number
l $wifi_number
l $bluetooth_number
Example:
action_url.setup_completed = http://192.168.0.20/help.xml?IP=$ip
Permitted
Values
URL within 511 characters
The value format is: http(s)://IP address of server/help.xml?variable name=variable value. For Pre-defined
events, refer to Pre-defined Events List. For variable value, refer to Variable Values List.
Default Blank
Web UI Features->Action URL->Setup Completed
To Next Page
Loading...
