Yealink T21PE2 - DST Settings

Phone Customization
125
Menu->Basic->Time & Date->General->SNTP Settings->NTP Server2
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Basic Settings->Time&Date->SNTP Settings->NTP Server2
Parameter local_time.interval <y0000000000xx>.cfg
Description It configures the interval (in seconds) at which the phone updates time and date from the NTP server.
Permitted
Values
Integer from 15 to 86400
Default 1000
Web UI Settings->Time&Date->Update Interval (15~86400s)
Parameter local_time.time_zone <y0000000000xx>.cfg
Description It configures the time zone.
Permitted
Values
-12 to +14
For available time zones, refer to Time Zone.
Default +8
Web UI Settings->Time&Date->Time Zone
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Time & Date->General->SNTP Settings->Time Zone
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Basic Settings->Time&Date->SNTP Settings->Time Zone
Parameter local_time.time_zone_name <y0000000000xx>.cfg
Description
It configures the time zone name.
Note: It works only if “local_time.summer_time” is set to 2 (Automatic) and the parameter “local_time.-
time_zone” should be configured in advance.
Permitted
Values
String within 32 characters
The available time zone names depend on the time zone configured by the parameter “local_time.time_
zone”. For available time zone names, refer to Time Zone.
Default China(Beijing)
Web UI Settings->Time&Date->Location
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Basic->Time & Date->General->SNTP Settings->Location
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Settings->Basic Settings->Time&Date->SNTP Settings->Location
DST Settings
You can set DST for the desired area as required. By default, the DST is set to Automatic, so it can be adjusted auto-
matically from the current time zone configuration.