Phone Provisioning
85
Note: It works only if “static.auto_provision.dhcp_option.enable” is set to 1 (On).
Permitted
Values
Integer from 135 to 65535, except 143
Default Blank
Web UI Settings->Auto Provision->IPv6 Custom Option
Parameter static.auto_provision.url_wildcard.pn <y0000000000xx>.cfg
Description
It configures the characters to replace the wildcard $PN in the received URL of the provisioning server.
Note: The configured characters must be in accordance with the actual directory name of the pro-
visioning server.
Permitted
Values
String within 32 characters
Default
For T54S IP phones: T54S.
For T52S IP phones: T52S.
For T48G IP phones: T48G.
For T48S IP phones: T48S.
For T46G IP phones: T46G.
For T46S IP phones: T46S.
For T42G IP phones: T42G.
For T42S IP phones: T42S.
For T41P IP phones: T41P.
For T41S IP phones: T41S.
For T40P IP phones: T40P.
For T40G IP phones: T40G.
For T29G IP phones: T29G.
For T27G IP phones: T27G.
For T23P IP phones: T23P.
For T23G IP phones: T23G.
For T21(P) E2 IP phones: T21P_E2.
For T19(P) E2 IP phones: T19P_E2.
For CP920 IP phones: CP920.
Static Provision Configuration
To use the static provision method, you need to obtain the provisioning server address first when configuring a pro-
visioning server.
The provisioning server address can be IP address, domain name or URL. If a user name and password are specified as
part of the provisioning server address, for example, http://user:pwd@server/dir, they will be used only if the server
supports them.
To Next Page
Loading...
