Yealink T21PE2 - Alert-Info: Bellcore-Drn

Audio Features
337
Alert-Info: Bellcore-drN
When the Alter-Info header contains the keyword “Bellcore-drN”, the IP phone will play the desired ring tone.
The following table identifies the corresponding ring tone:
Value of N
Ring Tone
(features.alert_info_tone = 1)
Ring Tone
(features.alert_info_tone = 0)
1 Bellcore-dr1 Ring1.wav
2 Bellcore-dr2 Ring2.wav
3 Bellcore-dr3 Ring3.wav
4 Bellcore-dr4 Ring4.wav
5 Bellcore-dr5 Ring5.wav
6 Ring6.wav
7 Ring7.wav
8 Ring8.wav
9 Silent.wav
10 Splash.wav
N<1 or N>10 Ring1.wav
Examples:
Alert-Info: http://127.0.0.1/Bellcore-dr1
Alert-Info: test/Bellcore-dr1
Alert-Info: Bellcore-dr1
Alert-Info: Bellcore-dr1;x-line-id=1
Alert-Info: <http://10.1.0.31>;info=Bellcore-dr1
The following table identifies the different Bellcore ring tone patterns and cadences (These ring tones are designed for
the BroadWorks server).
Bellcore Tone
Pattern
ID
Pattern Cadence
Minimum Duration
(ms)
Nominal Duration
(ms)
Maximum Duration
(ms)
Bellcore-dr1(stand-
ard)
1
Ringing
l 2s
On
1800 2000 2200
Silent
l 4s
Off
3600 4000 4400
Bellcore-dr2 2
Ringing Long 630 800 1025
Silent 315 400 525
Ringing Long 630 800 1025
Silent 3475 4000 4400