Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
398
You can configure a directed call pickup code and pick up the incoming call using the DPickup soft key.
Tip
You can set a DSS key as a Directed Pickup key, and specify a contact you want to pick up a call from for this key. For more
information, refer to DSS Keys.
The following table lists the parameters you can use to configure directed call pickup.
Parameter features.pickup.direct_pickup_enable <y0000000000xx>.cfg
Description It enables or disables the user to use DPickup soft key when performing directed call pickup feature.
Permitted
Values
0-Disabled
1-Enabled, the phone will display the DPickup soft key on the Dialing screen.
Default 0
Web UI Features->Pick up & Park->Directed Call Pickup
Parameter features.pickup.direct_pickup_code <y0000000000xx>.cfg
Description
It configures the directed call pickup code on a phone basis.
Note: The directed call pickup code configured on a per-line basis (“account.X.direct_pickup_code”)
takes precedence over that configured on a phone basis (“features.pickup.direct_pickup_code”).
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Pick up & Park->Directed Call Pickup Code
Parameter
account.X.direct_pickup_code
[1]
<MAC>.cfg
Description
It configures the directed call pickup code.
Note: The directed call pickup code configured on a per-line basis (configured by the parameter “accoun-
t.X.direct_pickup_code”) takes precedence over that configured on a phone basis (configured by the para-
meter “features.pickup.direct_pickup_code”).
Permitted
Values
String within 32 characters
Default Blank
Web UI Account->Advanced->Directed Call Pickup Code
To Next Page
Loading...
