Yealink T21PE2 - Page 167

Phone Customization
161
T21(P) E2: 1-2
Default 1
Web UI Dsskey->Line Key->Line KeyX->Line
Phone UI Menu->Features->DSS Keys->Line Key X->Account ID
Parameter linekey.X.value
[1]
<y0000000000xx>.cfg
Description
It configures the value for some line key features.
For example, when you assign the Speed Dial to the line key, this parameter is used to specify the contact
number you want to dial out. It is also used to specify the contact number with the DTMF sequence. The
contact number and DTMF sequence are separated by commas.
Note: You do not need to configure this parameter when “linekey.X.type” is set to 4, 5, 7, 8, 18, 20, 22, 25,
34, 38, 39, 41, 42, 45, 50, 61 or 66. It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
String within 99 characters
Default Blank
Web UI Dsskey->Line Key->Line KeyX->Value
Phone UI Menu->Features->DSS Keys->Line Key X->Value
Parameter linekey.X.label
[1]
<y0000000000xx>.cfg
Description
It configures the label displayed on the phone screen.
This is an optional configuration.
Note: It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
String within 99 characters
Default Blank
Web UI Dsskey->Line Key->Line KeyX->Label
Phone UI Menu->Features->DSS Keys->Line Key X->Label
Parameter linekey.X.shortlabel
[1]
<y0000000000xx>.cfg
Description
It configures the short label displayed on the LCD screen.
Note: It is only applicable to T52S IP phones.
Permitted
Values
String within 99 characters
Default Blank
Web UI Dsskey->Line Key->Line KeyX->Short
Phone UI Settings->Features->Dsskey->Line Key X->Shortlable
Parameter linekey.X.extension
[1]
<y0000000000xx>.cfg
Description
For multicast paging:
It configures the channel of the multicast paging group.
For BLF/BLF list/intercom feature: