Yealink T21PE2 - Page 225

Account Settings
219
Note: It works only if “phone_setting.logon_wizard” is set to 1 (Enabled). It is not applicable to CP920 IP
phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter hotdesking.startup_username_enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to provide input field of user name on the logon wizard after startup
when there is no registered account.
Note: It works only if “phone_setting.logon_wizard” is set to 1 (Enabled). It is not applicable to CP920 IP
phones.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Parameter hotdesking.startup_password_enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to provide input field of password on the logon wizard after startup
when there is no registered account.
Note: It works only if “phone_setting.logon_wizard” is set to 1 (Enabled). It is not applicable to CP920 IP
phones.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Parameter hotdesking.startup_sip_server_enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to provide input field of SIP server on the logon wizard after startup
when there is no registered account.
Note: It works only if “phone_setting.logon_wizard” is set to 1 (Enabled). It is not applicable to CP920 IP
phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter hotdesking.startup_outbound_enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to provide input field of the outbound server on the logon wizard after
startup when there is no registered account.
Note: It works only if “phone_setting.logon_wizard” is set to 1 (Enabled). It is not applicable to CP920 IP
phones.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter phone_setting.logon_wizard_forever_wait <y0000000000xx>.cfg
Description
It enables or disables the IP phone to remain at the hot desking logon wizard even though timeout.
Note: It is not applicable to CP920 IP phones.
Permitted
0-Disabled