Yealink T21PE2 - Page 240

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
234
Elements Attributes Description
Contact
display_name
Specify the contact name.
For example: Jim
Note: The contact name cannot be blank or duplicated.
office_number Specify the office number or macro EDK Macro Strings.
mobile_number Specify the mobile number or macro EDK Macro Strings.
other_number Specify the other number or macro EDK Macro Strings.
line
Specify a registered line for this contact for calling.
Valid Values: -1~15;
-1 stands for Auto (the first registered line);
0~15 stand for line1~line16.
vary by phone models: T54S/T48S/T48G/T46S/T46G/T29G: 0~15; T52S/T42S/T42G:
0~11; T41P/T41S/T27G: 0~5; T40P/T40G/T23P/T23G: 0~2; T21(P) E2: 0~1
Note: This is not applicable to T19(P) E2/CP920 IP phones.
ring
Specify a ringtone for this contact.
System ring tone:
Auto
Silent.wav
Splash.wav
RingN.wav (integer N ranges from 1 to 8)
Custom ring tone:
XX.wav (for example, Music.wav, the custom ring tone should be uploaded in
advance)
group_id_name
Specify which group the contact adds to.
Built-in group:
All Contacts, Blacklist
Custom group:
XXX (for example, Friend)
default_photo
Built-in avatar:
Resource: avatar name
Custom avatar:
Config: custom avatar name
Note: It is only applicable to T54S/T52S/T48S/T48G/T46S/T46G/T29G IP phones.
auto_divert Specify a destination number for diverted calls.
Related Topic