EasyManua.ls Logo

Yealink T21PE2 - Page 268

Yealink T21PE2
556 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administrators Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
262
Example:
dialplan.dialnow.rule.1 = 123
Note: It works only if dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Permitted
Values
String within 511 characters
Default Blank
Web UI Settings->Dial Plan->Dial Now->Rule
Parameter
dialplan.dialnow.line_id.X
[1]
<y0000000000xx>.cfg
Description
It configures the desired line to apply the dial now rule. The digit 0 stands for all lines. If it is left blank, the
dial-now rule will apply to all lines on the IP phone.
Note: Multiple line IDs are separated by commas. It works only if dialplan.digitmap.enable and “accoun-
t.X.dialplan.digitmap.enable” are set to 0 (Disabled). It is not applicable to T19(P) E2 IP phones.
Permitted
Values
0 to 16 (for T54S/T48S/T48G/T46S/T46G/T29G)
0 to 12 (for T52S/T42G/T42S)
0 to 6 (for T41P/T41S/T27G)
0 to 3 (for T40P/T40G/T23P/T23G)
0 to 2 (for T21(P) E2)
0, 1 (for CP920)
Default Blank
Web UI Settings->Dial Plan->Dial Now->Account
Parameter phone_setting.dialnow_delay <y0000000000xx>.cfg
Description
It configures the delay time (in seconds) for the dial now rule.
When entered numbers match the predefined dial now rule, the IP phone will automatically dial out the
entered number after the designated delay time.
If it is set to 0, the IP phone will automatically dial out the entered number immediately.
Note: It works only if the values of the parameters dialplan.digitmap.enable” and accoun-
t.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Permitted
Values
Integer from 0 to 14
Default 1
Web UI Features->General Information->Time Out for Dial Now Rule
Parameter dialplan_dialnow.url <y0000000000xx>.cfg
Description
It configures the access URL of the dial now template file.
For customizing dial now template file, refer to Dial Now File Customization.
Note: It works only if dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Permitted
String within 511 characters

Table of Contents

Related product manuals